Name: X-Ray Chassis Rimfire
SKU: 80798
Availability: InStock

X-Ray Chassis (Generation 5 Chassis) Forend:

Polymer for light weight and to eliminate heat transfer to/from the shooter’s hand.
MLok slots on sides and bottom for mounting flexibility
Threaded mounting holes at various positions will take L2 Picatinny rails, Barrier stop, Arca Rail, etc…
Access hole for action mounting screw, so you can remove the action without removing forend (with the use of extended bit).

“Backbone”/Chassis:

Aluminum backbone runs to tip of forend for maximum stiffness and modularity.
Utilizes radius bedding, which is CNC’d into aluminum backbone for consistent contact between action and chassis.
Tikka inlets have hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s.
Will accept most heavy barrel contours.

Cheekpiece/Handgrips:

Cheekpiece infinitely adjustable within range (1” travel).
Cheekpiece can be quickly removed and re-installed, uses a clamp and thumbscrew design.
The thumbscrew can be positioned on either the right or left side of the chassis.
Includes a simple feature to make the cheekpiece return to the exact height you set it.
Cheekpiece can be moved forward or backward with one alternate position.
Cheekpiece made of polymer to not transmit heat to or away from your face.
Small grips are standard fitment. Large grips are available to purchase separately in our Products/Accessories section of the website.

Length of Pull (LOP):

Adjustable with spacers in 3/8″ increments with nearly 2 1/4” of adjustment range.
Minimum LOP range varies slightly between versions but is roughly 12.7”-13” and can be extended to 14.8-15.1″ with 6 spacers (technically even longer is possible with even more spacers).
X-Ray’s include our 1-3 LOP kit which includes 3 spacers and the hardware to mount either 1, 2, or 3 allowing a max LOP of about 13.8″

Buttstock:

Single piece body made of reinforced polymer material.
Heavy internal ribbing provides great strength.
Mounting points for external QD cup or for our Sling Loop/QD mount on either side.
Built in thumbshelf for same-side-thumb-grip shooters.
Entire buttstock assembly can be used on Whiskey-3 if you should desire.

Buttpad:

Mounting features for slings, monopods, bag rider, etc:

Buttstock has one position on each side for external QD cup and one position on each side for Sling Loop/QD mount (optional accessories).
Buttstock includes mounting points for an optional bag rider/butthook or MOE L2 Picatinny rail.
Harris bipod stud included on forend.
Spigot Mount can be added to front of chassis.
Ambi QD sling plate can be mounted and provides 3 positions for QD sling or HK hook sling attachments.

Optional Accessories:

Materials/Finishes:

Most aluminum parts are hard anodized (Type III).
All fasteners are stainless steel, some with black oxide coating, some are without.
Steel parts are salt bath nitrided or stainless steel.
Grip panels, forend, buttstock are injection molded reinforced polymer.

Weight:

Color:

X-Ray Chassis Rimfire

You may also like