Whiskey-3 Chassis

Whiskey-3 Fixed Chassis in Crimson Red color shown on Remington 700 with KRG Bolt Lift SV, Arca Rail Heavy, ∆-Lug Arca Clamp, Atlas Bipod Adapter and Atlas Bipod

Whiskey-3 Fixed Chassis on Howa 1500 SA in black, Harris Bipod and KRG Shooting Mat/Case

Whiskey-3 Fixed Chassis Remington 700 in Stealth Grey color, KRG Minimalist Spigot with directly mounted Atlas Bipod

Whiskey-3 Fixed Chassis in Sako Green color shown on Remington 700 with KRG Bolt Lift SV and other goodies

Whiskey-3 Folding Chassis in FDE color on Tikka T3 with extra accessories

Whiskey-3 Folding Chassis shown on Remington 700 with Enclosed Forend and Machined Thumbscrew kit for the rear ergonomic adjustments, both available separately

Whiskey-3 Chassis Gen 6 shown as it ships with included large grips, KRG L2 rail and fasteners

Whiskey-3 Folding Chassis Gen 6 in Black

Whiskey-3 Fixed Chassis in Crimson Red color

Whiskey-3 Fixed Chassis in Crimson Red color

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 folder in black color on SOTIC Rifle with included large grips (small grips installed as it ships)

Whiskey-3 folding chassis in black with stock folded, no accessory items (old style grips)

Whiskey-3 folding chassis in black with stock folded, no accessory items (old style grips)

Whiskey-3 folder on Tikka T3 with .223 Criterion barrel in FDE color, shown with included large grip panels (small grips installed as it ships)

Closeup of Whiskey-3 folder hinge mechanism; separate locks for extended and folded positions; locks solidly with taper lock in the extended (usable) position (old style grips)

Closeup of Whiskey-3 folder hinge mechanism partially closed; separate locks for extended and folded positions; locks solidly with taper lock in the extended (usable) position; aluminum backbone/bedding surface visible (old style grips)

Closeup of Whiskey-3 folding rear half in black on Remington 700 clone; Machined Thumbscrew kit visible, available as accessory item

Closeup of Whiskey-3 chassis with KRG accessory item Enclosed Forend added, plus non KRG items

Whiskey-3 rear half showing length-of-pull extended, full cheekpiece height available, and buttpad raised; KRG Bolt Lift SV on Remington 700 visible at right (old style grips)

$969.99 – $1,549.99

Buttstock

Inlet

Color

Clear

SKU: N/A

*Remington 700 Short Action Enclosed Forend version now ships with Arca Enclosed Forend.

*We do not guarantee proper feeding with the KRG/Tikka T3/6.5PRC combo.

*The Tikka inlet accepts T3, T3x, and CTR versions, however slight mods may be required on the trigger-guard for the T3 TAC A1 to function properly. Tikka rifles accept AICS pattern mags with the exception of the Magpul AICS polymer mags.

*Actions with trigger hangers will not work without mods to the chassis, hanger, or both.

*We do not guarantee the proper function of Vudoo V22 or Bergara B-14r (rimfire) magazines in our chassis. It may be necessary to install and fit our Extended Mag Catch for proper feeding.

*All of our chassis take AICS magazines with nothing extra needed, the magazine is not included.

*Remington 700 long action chassis take 3.850" (CIP) length AICS pattern magazines or 3.715" AICS mags with included spacer.

*Receive $10 off each KRG Logo AICS magazine (up to 5) with any chassis order (at the time of purchase only). Discount taken automatically at checkout (let us know if not). Offer not applicable to dealers.

*Receive $5 off Bolt Lift with purchase of Rem 700 chassis. Only available at the time of purchase. Does not apply to dealers.

Add free KRG Target Pad to your KRG Chassis order

General Info for Whiskey-3 Chassis

The Whiskey-3 Chassis (W3C) (new Generation 6 starting Jan 2018) is one of the premier chassis available for your bolt action precision rifle.

Replace your Remington stock with Whiskey-3 Chassis. The W3C combines precise aluminum bedding with tool-less adjustments, durability, and excellent ergonomics. Right out of the box it allows the use of AICS style magazines (not included) in your rifle without any special bottom metal.

Numerous types of accessories can be added to the many attachment points, including handstops, sling mounts, rails, bipods, monopods, and more.

Our modular grip panels allow the shooter to tailor the fit of the stock to his/her hand which, combined with the other adjustments, yield a stock set up exactly as it needs to be for that particular shooter.

The W3C Gen 6 is available as of Jan 2018 in fixed and folding stock versions for the following rifles:

Tikka T3/T3x/CTR (short action calibers only).
Remington 700 short and long action.
Sako TRG-22
Sako TRG-42 (aluminum forend only)
Sako M995 (aluminum forend only)
Stiller TAC338 (aluminum forend only)
Badger 2008/13 Long Action
HOWA 1500 short action/Weatherby Vanguard SA(Fixed Only)

Chassis lenght:

Open - 29 3/8"
Folded - 20"

More Detailed Info

Download Instructions Whiskey-3 Gen 6

Download Instructions for TRG22/42 Gen 6

Download Instructions Whiskey-3 Gen 5

Polymer to keep your hand away from hot metal in the summer and cold metal in the winter
Threaded mounting holes at various positions, total of 15-20.
Access hole for action mounting screw, so you can remove the action without removing forend.
Side mounting options for rail, flush mount QD sling plate, external QD cup, etc on both sides of forend. Ships with one QD cup on the left side.

“Backbone”/Chassis:

Utilizes radius bedding, which is CNC’d into aluminum backbone for consistent contact between action and chassis.
Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s.
Rem 700 version can accommodate most large aftermarket recoil lugs like the Badger Ordnance lug without any or with only slight modification.
Designed for 5 or 10 round AICS magazines (with or without front spacer plate in T3, with spacer plate only in Rem 700 unless you have a modified action); Rem 700 LA now uses 3.850″ length AICS pattern magazines.
Barrel contours accepted: 1.25″ for 4″ in front of action face, then 1.20″ straight to end of forend. A 1.25″ straight cylinder barrel will fit but we feel that the clearance is too minimal. We recommend using no larger than a varmint contour to keep proper balance.

Trigger Guard/Mag catch:

Rem 700 version will accept x-mark triggers and most aftermarket triggers though some may require modifications to the trigger or chassis.
Mag catch is our new low profile version which reduces snags while still providing excellent ergonomics and control.

Magazines Used:

Remington 700 short action and Tikka T3 use AICS .308 mag in either 5 or 10 rd capacity. Accuracy International part numbers 3901 and 3902 respectively.
Remington 700 long action and Badger M2008/13 long action use AICS pattern 3.850″ length length magazines, a .300wm version is available from Accurate Mag and the Accuracy International AICS .338 CIP mags can be used as well. AI part number 4808 (bend in feedlips to use with smaller cartidges like .300 WM).
Magazines are not included. We recommend actual Accuracy International magazines or those from Accurate Mag.

Folding Mechanism (not applicable for fixed stock):

Main latch uses proven tapered lever style lockup.
Secondary latch locks buttstock in folded position.
Spring loaded plungers lock automatically.
Tapered design of primary latch allows tight lockup through wear of the system.
Latch components made of hardened stainless steel and nitrided high strength chromoly steel.

Cheekpiece:

Infinitely adjustable within range (1” travel). You are not locked into set positions.
Cheekpiece can be quickly removed and re-installed, uses a clamp and thumbscrew design.
Includes a simple feature to make the cheekpiece return to the exact height you set it.
Cheekpiece can be moved forward and backward with several mounting positions.
Cheekpiece made of polymer to not transmit heat to or away from your face.

Length of Pull:

Adjustable in ¼” increments with 1 3/4” of adjustment range.
LOP range varies slightly between versions but is roughly 13.3” to 15”.
Uses cam lock and thumbscrew to ensure a solid fit.

Buttstock:

CNC milled from billet aluminum.
Entire buttstock assembly can be mounted to KRG chassis X-ray, Bravo, 180-Xray for CZ455, and also Sako TRG-22/42 rifle.

Buttpad:

Moves vertically to set positions within range.
Tool-less adjustable.
Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads.
Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore).

Mounting features for slings, monopods, etc:

Buttstock has QD sling cup on each side and provisions for other mounting options. Folding stock has one additional QD mount point built in.
Buttstock includes bag rider which can be replaced with included picatinny rail.
Harris bipod stud included on forend.
QD cups can be mounted on any number of positions on sides or bottom of forend.

Optional Accessories:

Large selection of accessories from sling mounts to tripod mounts.
ALL STOCKS COME WITH ONE MOE L2 RAIL.

Materials/Finishes:

Most aluminum parts are hard anodized (Type III).
All fasteners are stainless steel with black oxide coating.
Steel parts are salt bath nitrided or stainless steel.
Grip panels are injection molded reinforced polymer.

Weight:

Fixed version is ~ 3.8 lbs w/o magazine.
Folding version is ~ 4.1 lbs w/0 magazine.

Color:

Black, FDE, Sako Green.

Changes for Gen 2:

Threaded mounting holes in forend in slightly different position, some are positioned to use the Magpul MOE L2 picatinny rail.
Trigger guard held on by two screws now instead of one screw and a tab.
No holes drilled in barrel channel on Gen II (vent holes).
Grip panels are injection molded reinforced polymer instead of cast polyurethane.
Cheek piece is wider, taller, and more comfortable, and also injection molded.
Bag rider/Butthook is injection molded and included with chassis instead of being optional accessory.
Set screw has been added to top of buttstock to lock down LOP system to eliminate any play.
Bottom of buttstock has been modified to accept Magpul MOE L3 rail instead of L1 rail for more mounting positions, also there are two additional M5 threaded mounting points on the buttstock for more mounting options.

Changes for Gen 3:

Will accept either our small grip panel option or our regular grip panels readily, whereas the Gen II stocks will require replacement of two metal components to accept the small grip panels.
Fixed stocks can no longer be upgraded to a folding stock after they are purchased.
Stocks which use a .308 sized AICS magazine now have a wider trigger guard which facilitates magazine insertion and the trigger guard has a larger opening for the trigger which means some aftermarket triggers will drop in with no modifications to the chassis.
Stocks have an alternate position for the QD mount point in the buttstock as well as some new mounting positions for other types of sling mounts.
Stocks have new forend mounting points that allow MOE rails and our flush mount QD sling plate to be mounted, and they retain the two hole NV mount of the Gen II.(These were included on later Rem 700 gen 2 stocks).
Length of pull adjustment levers moved to right side to remove possible interference with sling.
Access hole for front action screw is enlarged to allow easier access with a torque wrench (this also means the front action screw is no longer captured).
Weight for the fixed stock has dropped about 5oz to 4lb 10oz for Rem 700 version..
Forends have grooves to keep Harris bipods from twisting.
Front ends have mounting holes specifically meant for solid mounting of our new spigot mount.
Cost has increased slightly to $919 fixed $1289 folding.
Some other changes like slightly revised buttstock design.

Changes for Gen 4:

Additional mount point on side of forend to fit our sling loop (HK style loop)/QD mount.
Five main components of fixed buttstock consolidated into single part.
Single LOP cam with 180 degree rotation to locked position.
Moved lower spar leg forward on buttstock to avoid it hitting non-trigger hand during recoil.
Enlarged thumbshelf and the left side thumbshelf can now be used on the folding chassis.
Added QD mount point at hinge in folding chassis to sling when folded.
Simplified hinge mechanism in folding chassis.
Added clearance for more aftermarket triggers in Rem 700 chassis versions.
Weight has been decreased by several ounces on both folding and fixed.
Slight cost increase on both configurations to $939 fixed, $1299 folding.
Additional minor changes.

Changes for Gen 5:

Forend changed to polymer, weight reduced and magazine well stop incorporated, additional mounting points added
Triggerguard changed to polymer on Remington versions
Mag release button changed to Polymer to reduce inertia
Aluminum backbone lightened
Additional fore/aft mounting points added to cheekpiece
Cheekpiece thumbscrew now captured and molded polymer
Tool-less adjustment for buttpad height and cant added
Reduced weight over 1/2 pound
Cost decrease on Rem 700SA fixed stock to $899 fixed
Additional minor changes.

***Changes for Gen 6:

Length of pull adjustment system changed for more streamlined function
Slight cosmetic change to rear resulting from LOP change, plus additional minor changes.
All color variants are the same cost as the black version

Whiskey-3 Chassis

Whiskey-3 Fixed Chassis in Crimson Red color shown on Remington 700 with KRG Bolt Lift SV, Arca Rail Heavy, ∆-Lug Arca Clamp, Atlas Bipod Adapter and Atlas Bipod

Whiskey-3 Fixed Chassis on Howa 1500 SA in black, Harris Bipod and KRG Shooting Mat/Case

Whiskey-3 Fixed Chassis Remington 700 in Stealth Grey color, KRG Minimalist Spigot with directly mounted Atlas Bipod

Whiskey-3 Fixed Chassis in Sako Green color shown on Remington 700 with KRG Bolt Lift SV and other goodies

Whiskey-3 Folding Chassis in FDE color on Tikka T3 with extra accessories

Whiskey-3 Folding Chassis shown on Remington 700 with Enclosed Forend and Machined Thumbscrew kit for the rear ergonomic adjustments, both available separately

Whiskey-3 Chassis Gen 6 shown as it ships with included large grips, KRG L2 rail and fasteners

Whiskey-3 Folding Chassis Gen 6 in Black

Whiskey-3 Fixed Chassis in Crimson Red color

Whiskey-3 Fixed Chassis in Crimson Red color

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 fixed chassis in Stealth Grey color (old style grips)

Whiskey-3 folder in black color on SOTIC Rifle with included large grips (small grips installed as it ships)

Whiskey-3 folding chassis in black with stock folded, no accessory items (old style grips)

Whiskey-3 folding chassis in black with stock folded, no accessory items (old style grips)

Whiskey-3 folder on Tikka T3 with .223 Criterion barrel in FDE color, shown with included large grip panels (small grips installed as it ships)

Closeup of Whiskey-3 folder hinge mechanism; separate locks for extended and folded positions; locks solidly with taper lock in the extended (usable) position (old style grips)

Closeup of Whiskey-3 folder hinge mechanism partially closed; separate locks for extended and folded positions; locks solidly with taper lock in the extended (usable) position; aluminum backbone/bedding surface visible (old style grips)

Closeup of Whiskey-3 folding rear half in black on Remington 700 clone; Machined Thumbscrew kit visible, available as accessory item

Closeup of Whiskey-3 chassis with KRG accessory item Enclosed Forend added, plus non KRG items

Whiskey-3 rear half showing length-of-pull extended, full cheekpiece height available, and buttpad raised; KRG Bolt Lift SV on Remington 700 visible at right (old style grips)

You may also like